How To Install A Dash Cam? 2022

How to install a dash cam

A dash cam, or dashboard-mounted camera, can be a helpful tool for recording footage of the road while you’re driving. This can be useful for providing evidence in an accident, but it can also help capture scenic drives or spot potential hazards on the road. While some dash cams come with intricate installation instructions, most are easy to set up. The following steps will walk you through installing a dash cam in your vehicle.

Installation with a CLA

Though you don’t smoke, cigarette lighters in cars have more use than most people think. Simply connect your battery-powered cigarette light adapter to your dashcam and your vehicle, and you can run your silent witness at the same time within less than five minutes. We even include a dash cam mount guide that explains the proper positioning and location of a dashcam. While it’s the simplest and easiest way to charge your dash cam installation, the cable can be disconnected, and you may lose important dash cam protection capabilities such as parking mode. However, you can still access other functions, such as your smartphone application integration or WiFi connection.

Hard Wire installation in the fusebox

Hardwire your dashcam to the vehicle’s fuse box is among the most popular installation procedures. When your vehicle is off, you will be able to turn the dashcam off by using parking mode. This feature is useful if your camera has a parking-mode feature, but Hardwire kits can also be found for our dashcams which have become widely popular in recent years by drivers wanting 2-channel cameras to protect them on the road all times. Front and rear mirrors are provided. Your fusebox provides electrical input for your front and rear cameras and allows the dashcam to save important images to the memory card while the vehicle isn’t on.

Installation with an OBD Cable

A redesigned OBD cable system should give customers an alternative to traditional wire-based wiring. It is necessary to plug the cables into your automobile’s OBD port. After the process has been completed, your dash can receive a recording of your dash cam video depending on the dash camera used, as if it was hardwired to the fuse box. Unlike using hardwired equipment, you get access to features including parking mode, WiFi, GPS, and more. Rear camera installations are also identical. It is also available for every vehicle model, and the OBD system can be installed on most cars.

Line And load side

The line “and” load” are shorthands for a wire supplying electricity from a source on an electronic device (line) or that transmits electrical power further down a circuit (load). By determining the lines and loads of each wire, the hard wire kit will protect against overcurrent. If we have determined a constant or switched fuse, we can check the side of each fuse by multi-metering the fuse itself. The meters indicate the sides where the fuse runs. Finally, we insert the fuse to correct the orientation.

How to determine the line and load side with your Add-a-Fuse?

Set the multimeter at 20 volts. You can use any fuse to test (concurrent or switchable). This procedure can also be followed for another fuse. Replace the fuse and insert the fuse into the blank slot. When black leads touch your ground point, test the line sides by placing red leads in the bottom left slots. It has to have 12 V. Test load by placing a red led in a slot below your add-in fuses. 0v is 0V. Upon confirmation, these add-a-fuses should have the appropriate orientation. If not, you remove the add-a-fuse. Repeat steps 4 & 7 to check for accuracy.

Where to place your dash cam?

The Cam is equipped with suction and semipermanent adhesive. In the case of suction, you can experiment with a camera position until you find the optimal placement. If there are sticky items, be careful with them because you’ll have a few shots at them. It is best to have it close to the centerline to ensure maximum coverage on either side. Several laws prohibit the driver from viewing the vehicle. As advisable, preferably in unobtrusive locations only. Then, both are generally good places.

Locate a Ground Point

Ground means the path of electrical power in return. In case of failure, Groundwire serves as a way back to the origin. Grounding a cable in its place should ensure safety. When the hard wire isn’t properly configured, your computer might be unable to function. Usually, components from a chassis give a solid foundation. Typically cars were made with various components, including metal plates and welded slit-in panels. Therefore, we can’t expect good ground for the chassis.

Aligning the dash cam to the horizon

If you use the suction mount, you can skip this and try until the correct thing happens. If you have adhesive mounting, the camera’s position must be closest to the ground as far as possible. Generally speaking, fine placement is not so important if the adhesive mount is merely the base of an ordinary articulating mount. The shape of this vehicle makes the correct slant easier to detect by the eyes.

Testing Constant and Switched Fuses

Generally, switchable fuse boxes contain two types of electrical wiring in your fuse box. By knowing which fuse is constant and switched, we can “piggyback” on the two different fuses and connect them with our hardwire kit. The dimmer cam will require the determination of x1 continuous fuse and x1 switches fused for the application.

Test your car battery

Once we locate a faulty fuse box and an electrically charged battery, our labs check the battery’s health. A clean battery in your car will keep the battery functioning properly, preventing damage to your car or the battery’s components from causing damage.

How can I test my car battery with a multimeter?

Multimeters are used to measure batteries for optimum health if necessary. Your battery should use negative (+) and positive (+) terminals; we’re testing them. When you cannot find your connection to these devices, it’s possible that the batteries must be removed for the battery’s connection to be accessible. Plug the black and red connectors into an external multimeter with the current setting of 20DCV. Use the black LEDs for a negative (+ ) battery terminal or the red led for your battery. Please read it carefully. A healthy battery is 12V or 23.64V. If your batteries are less than 11.5 V or 22.66 V, this could indicate low battery performance.

Related: Best Dash Cam For Truckers

Frequently Asked Question:

Is installing a dash cam easy?

It can be easy, but it often takes time and effort to find the right spot for the camera. Some people also have trouble with the installation process.

How much does it cost to install a dash cam?

It can cost between $50 and $200 to install a dash cam, depending on the type of camera and the complexity of the installation.

How do I install my dashcam properly?

To install a dashcam properly, you’ll need to find a spot for the camera that provides the best view of the road and then connect the camera to your car’s electrical system. You may also need to test your car’s battery and fuses.

Should you hardwire a dash cam?

You should consider a few things before deciding whether or not to hardwire a dash cam.

  • First, you need to find a spot for the camera that provides the best view of the road.
  • Second, you’ll need to connect the camera to your car’s electrical system.
  • Finally, You may also need to test your car’s battery and fuses. If you’re comfortable with the installation process, hardwiring a dash cam can be an easy way to keep your car safe.


Installing a dash cam is not as difficult as it appears at first. However, it’s critical to check your car’s battery and fuses before you begin the installation process. If you’re familiar with the procedure, hardwiring a dash cam may be an easy method to keep your vehicle secure.

Leave a Comment