Best Risers for Mining with Your GPU 2022

Best Risers for Mining with Your GPU

A riser is an expansion card that increases the number of PCI-e slots available for your motherboard. They play a vital role in increasing the number of GPUs you can attach to your system, and therefore, their number varies according to the model and brand of GPU being used. Particularly for Mining with Your GPU, you need the Best Risers.

There are plenty of risers available with different connectors, which you can buy depending upon your needs. The most commonly used type is a USB 3.0 riser for motherboards that do not have enough PCIe ports to support multiple GPUs. It is also possible to use 1x, 16x, or even 32x powered risers depending upon the requirement of your mining rig. In this guide, we will mainly talk about 16x powered 1x to 16x risers which are the most commonly used for mining purposes.

It is necessary to use 1x or 16x riser cards To increase the number of GPUs attached to a single rig. Therefore, we will briefly explain their difference and how this affects your mining rig before going into detail about the best risers you can buy for your needs.

Different types of Best Risers for Mining with Your GPU and CPU

1X vs. 16X Risers: What’s The Difference?

As mentioned earlier, there are two types of risers available in the market, varying according to their port design. While 1x riser cards consist only of one PCI-e slot, 16x riser cards have many more (up to 16). Hence, more GPUs can be attached with 1x risers than on a motherboard itself. However, this is still not enough for some miners as not all graphics cards require more than two PCIe ports, even though they may come with four. Therefore, if you wish to use three or four GPUs simultaneously, buying separate 1x riser cards and your main rig can be an ideal solution due to the low cost compared to other options available. The only thing that needs to be checked before using multiple risers is whether they will function well together in terms of their compatibility and bandwidth requirements.

16X vs. 32x Risers: Which Is Better?

While many factors determine which riser to buy, the most common one is that your motherboard should have at least 16 PCIe slots to use a 16x riser. Therefore, you will require 1x powered risers if there are less number of PCIe ports on your mining motherboard or if you are using lower-end GPUs like RX470s or GTX 1060s, which do not require more than 2 PCI-e slots each. Moreover, 32x risers are also available to run two mining rigs simultaneously with four graphics cards per rig. If you plan on getting new motherboards for this purpose, it would be better to opt for the higher port count ones as they will provide more flexibility when scaling out your rig further.

A good 32x-powered riser like the one shown above can fit into PCIe 3.0 and 2.0 ports. However, with the increasing number of graphics cards in your mining rig, it is also necessary that you check how much power each card draws and then buy risers accordingly, as some GPUs may require more power than others. We highly recommend using SATA-powered risers for this purpose which are compatible with every motherboard.

However, we would personally recommend 16x powered riser cards as they allow better airflow than 1x risers due to their port design which means that no other card will be blocking airflow for another GPU on your board or adjacent boards if you choose to stack them up later for a 4-high mining rig configuration.

Top Rated Best Risers for Mining with Your GPU

GPU riser cables are the main factor in getting your graphics card to fit inside your mining rig. In addition, they are usually much longer than the ones provided with motherboards, which significantly increases the installation flexibility of GPUs.

You can also buy extra GPU risers for future use when adding more graphics cards to your rig. The second most important aspect is pricing because it determines quality and availability equally. The best VRAM for mining has been researched by our team and summarized in this article. We have listed the best Risers for Mining with Your GPU all types of cables commonly used today!

  • BEYIMEI PCI-E 1X to 16X GPU Riser Card For Bitcoin Mining
  • LinksTek PCIE Risers for ETH/BTC GPU Miner Rigs
  • Dracaena PCIE Riser Adapter Card for GPU Crypto Mining
  • Onvian Upgraded Mining Dedicated 4PIN Graphics Card
  • Ubit PCI-E Riser for Bitcoin Litecoin ETH Coin Mining Dual-6PIN Riser
  • VOLADOR PCIE Riser 1x to 16x Powered Riser Ethereum Mining Card
  • FebSmart PCI-E Riser VER006C GPU Riser ETH Coin Mining 6 PIN Riser

BEYIMEI PCI-E 1X to 16X GPU Riser Card For Bitcoin Mining

BEYIMEI PCI-E 1X to

Specifications:

  • Model: BEYIMEI PCI-E 1X to 16X Riser Card
  • Item Type: Riser Card
  • GPU: Support 6 Graphics Cards (not included)
  • Chipset: V2.0B1
  • Size: 9cm x 5cm x 0.12cm / 3.54″ x 1.97″ x 0.47″
  • Material: PCB
  • Suitable For: Ethereum mining equipment
  • Interface: PCI-E X1 & X16 Slot
  • Operating Temperature: 0°C to 50°C (-32°F to 122°F)
  • Relative Humidity: 5% to 95%RH, 20℃ ~ 80℃

About

BEYIMEI PCI-E 1X to 16X GPU Riser Card For Bitcoin Mining is a USB interface card used to directly connect the graphics cards to the motherboard’s USB slot. This product comes with riser boards and extension cables which You can use with all versions of graphics cards on the market. Getting started is very easy—no need for setting up any drivers or other complicated operations. You can plug it into your computer and then connect your graphics card to the USB slot on the riser card, and you’re ready to go!

Features:

The BEYIMEI is a PCI-E 1X to 16X Interface card with a USB 3.0 extension line. These GPU risers directly connect the graphics cards to the motherboard’s USB slot. Also, It has a 16pcs 60cm USB 3.0 cable and a 1pcs 20cm Micro PCI-E interface, which can be connected to a graphics card from your motherboard by PCI-E Slot directly.

The PCI-E riser requires no external power and provides a maximum data transmission bandwidth of up to 300MB/s. Bidirectional communication between the motherboard and add-in boards occurs through the standard USB 3.0 interface, downward compatible with USB 2.0/1.x

The PCI-E 1X to 16X Riser Cards are designed to set up mining rigs and work with all versions of graphics cards available on the market. This product can be used in PCI-E x1, x4, x8, and x16 slots.

Riser card installation is extremely simple, requiring no setup work or special software; simply plug it in and play. You may connect your graphics card to the USB port on the riser card using the included (20cm) PCI-E interface cable, and you’re ready to go!

Final Thoughts

Overall, BEYIMEI PCI-E 1X to 16X GPU Riser Card For Bitcoin Mining is not that pricey of a product compared to other risers out on the market; it’s built well and seems like it would last. It was very easy to set up and use. It works great and has a low profile. So it can fit into almost any case you have. If you’re looking for a PCI-E 1X to 16X GPU Riser Card For Bitcoin Mining, I recommend going with this card as it does work as intended.

  • Pros
  • Well made and easy to set up
  • Low profile design will fit in almost any case
  • No External Power Requires
  • Speed up to 300MB/s
  • Cons
  • None at this time

LinksTek PCIE Risers for ETH/BTC GPU Miner Rigs

LinksTek PCIE Risers for ETH/BTC GPU Miner Rigs, PCIE Riser Cable for Bitcoi

Specifications:

  • Platform: PCI-E x1 to x16 Slot Adapter Card
  • Chipset: V2.0B1,V5.0A,V5.1
  • Size: 7cm x 11cm x 0.12cm / 2.75″ x 4.33″ x 0.47″
  • GPU Support: Support Up to 6 Graphics Cards
  • Chipset: V2.0B1,V5.0A,V5.1
  • Interface: PCI-E X16 Slots (1Pcs) and PCI-E x1 slots (9Pcs) to USB 3.0 Cables
  • Material: PCB
  • Operating Temperature: 0°C to 50°C (-32°F to 122°F)

About

LinksTek PCI-E Risers for ETH/BTC GPU Miner Rigs comprise 1pcs full-length PCI-E 16x Slot with metal Shroud. Also, it has 9pcs High-speed PCI-E x1 slots with USB 3.0 Port and 1pcs 20cm Interface cable. So, you can connect to the motherboard by PCI-E slot directly. This GPU riser mining has a small size(7cm*11cm*0.12cm). And a lightweight (Only 0.012kg ) design for adding graphics cards to your computer.

In short, you can add GPU without occupying too much space or causing any disturbance to the other components inside the case. It’s designed to set up mining rigs using more than 6 graphics cards. And it is compatible with all versions of graphics cards available on the market.

Features

The PCI-E riser requires no external power, providing a maximum data transmission bandwidth of up to 5Gbps. In addition, the flat ribbon cable design is more flexible and easy for wire management.

This PCI-E riser works great and has a low profile, so it can fit into almost any case you have. It has a USB 3.0 PCI-E x1 adapter card with a 32cm long cable working with any card. The package also included a Molex to 2X SATA Power Cable so you could power the risers up with one cord.

I like the long cord because it makes it easier to hide if needed; I would recommend this product to anyone wanting a PCI-E 1X to 16X GPU Riser Card For Bitcoin Mining, especially if you plan to build a 6+ graphics card mining rig.

The PCI-E 1X to 16X Riser Card comprises the fully shielded USB 3.0 60CM-cable (USB3.0 Specification Ver.1.0) with enhanced aluminum connectors, which make it perfect for setting-up mining rigs or servers with heavy graphics cards around the PCI-E slot.

The LED indicators on the PCI-E riser card provide easy access and better viewing of whether the power is on or off, which also helps you quickly troubleshoot any connection issues.

Moreover, This USB 3.0 PCI-E Adapter provides a more affordable solution for accessing high bandwidth graphics cards. Via your computer’s motherboard PCI Express x1 interface New 2nd Generation PCI-E end-point hardware. So, it offers a solution for both AMD and NVIDIA mining graphics cards to ensure compatibility with as many as possible If you want to maximize your mining performance. Thus, this USB 3.0 PCI-E adapter is the best choice USB power, so no external power supply is required.

Final Thoughts

The LinksTek PCI-E 1X to 16X Riser Card comprises the fully shielded USB 3.0 60cm cable. Plus, it has enhanced aluminum connectors, which make it perfect for setting-up mining rigs or servers with heavy graphics cards around the PCI-E slot. The LED indicators on the PCI-E riser card provide easy access and better viewing of whether the power is on or off, which also helps you quickly troubleshoot any connection issues. Moreover, USB 3.0 PCI-E Adapter provides a more affordable solution for accessing high bandwidth graphics cards. It offers a solution for AMD and NVIDIA mining graphics cards to ensure compatibility with as many as possible.

  • Pros
  • Supports on most motherboards
  • PCI Express x1 to PCI Express X16 adapter
  • LED light indicator for each port
  • The strong aluminum case for heat dissipation
  • Cons
  • Short USB cord

Dracaena PCI-E Riser Adapter Card for GPU Crypto Mining

 Dracaena 6 Pack PCIE Riser Adapter Card for

Specifications

  • Standard: PCI Express X1 to X16 adapter
  • Interface Type: PCIe x1
  • Number of Ports/Slot: 16X to 1X Adapter, 2 ports per slot
  • Chipset Name: PL3530
  • Lane Width: PCI-E X16/X4 to 2 PCI-E 1X
  • PCI express Power Cable Length: 23cm/9.05 inch
  • Interface Type: PCIe X1 Female Slot (Upright) x16
  • Length of cable : 40cm, 50cm or 60cm

About

Dracaena PCI-rE Riser Adapter Card for GPU Crypto Mining 16X to 1X has a good design built with excellent materials. It looks like it will handle heat and power quite well. Plus, it comes with a six-month warranty too! The Dracaena PCI-E Riser Adapter Card for GPU Crypto Mining has a good design built with excellent materials. Plus, it comes with a six-month warranty too! This PCI-E Riser Adapter Card also comes with an extra power cable for those GPUs that may need more power than the PCIe slot can provide.

Features

You can use the Dracaena PCI-E Riser Adapter Card to connect your USB device to your motherboard. It is an easy way to connect USB devices to your motherboard. All you have to do is plug the adapter into a PCI-E X1 slot and install the driver for it, and you are ready to go!

If you plan to use this PCIe riser for mining purposes, please be aware that it may need a little more power than what the PCIe slot can provide, so make sure you have additional power available. You should also be aware that if your system does not support USB 3.0, this might not work as well as other riser adapters because the bandwidth needed for mining plus running Windows 10 as an OS will require even more from your motherboard.

The PCI-E riser card is also made with the best materials to ensure that your components are protected from any damage. This includes using shielded cables to avoid EMI, which can interfere with other devices on the motherboard and protect against voltage surges due to over-current conditions.

You should be aware that this adapter card will not fit into every motherboard’s PCIe X1 slot because it’s a bit wide at 5.5cm (2.17in). Therefore, you should check your motherboard specifications before buying such an adapter and ensure the dimensions you’re getting match up to those of your PCIe x1 slots. If they don’t, then it won’t work for you!

Final Thoughts

You can use the Dracaena PCI-E Riser Adapter Card to connect your USB device to your motherboard. It is an easy way to connect USB devices to your motherboard. All you have to do is plug the adapter into a PCI-E X1 slot and install the driver for it, and you are ready to go!

Overall, the Riser Adapter Card is a good investment because it’s made of high-quality materials. It will protect your GPU from EMI and power surges. Plus, You can use this PCI-E riser card for other devices such as wireless cards or sound cards. Also, the Dracaena PCI-E Riser Adapter Card is easy to install and has LEDs on both ends of the cable to make diagnosing issues straightforward.

  • Pros
  • 16X powered riser
  • Shielded cables
  • Solid aluminum case
  • Two LED light indicators per port
  • Provides extra power for GPUs
  • Cons
  • A little wide for some PCI X1 slots

Onvian Upgraded Mining Dedicated 4PIN Graphics Card

 Onvian Upgraded Mining Dedicated Graphics Ca

Specifications

  • Color: Blue
  • Product Name: Desktop PCI-E1X
  • PS Interface: Big 4PIN + 6PIN
  • Expansion: PCI-E16X
  • External: PCI-E1x
  • USB Cable Length: 60CM
  • System Support: Linux XP and Windows 7/8/10

About

The Onvian PCIe Riser Adapter Card for GPU Crypto Mining 16X to 1X is another top choice for a riser adapter card. This PCI Express x1 to x16 adapter comes with a cable that’s 50cm long and has onvian’s upgraded mining dedicated riser built into it!

Also, the Onvian Upgraded Mining Dedicated 4PIN Graphics Card PCI-E Riser Adapter Card allows you to connect your USB device to your motherboard. It is an easy way of connecting devices like wireless cards or soundcards! All of this is done by plugging the adapter into any available PCIe X1 slot of your motherboard and then installing the driver for it. After that, you’re ready to go!

Features

With this PCIe riser for mining purposes, you’ll be able to connect your motherboard to other devices while also powering up to two GPUs with one cable. In addition, the Riser Card will deliver power through the x16 slot of the motherboard, which is designed to avoid over-current damage due to short circuits.

The Onvian Upgraded Mining Dedicated 4PIN Graphics Card PCI-E Riser Adapter Card also has an advantage in that it’s equipped with LED lights on each adapter port so they can help guide you during troubleshooting and diagnostics! These lights are especially useful when you need to figure out if a GPU is getting enough power or not.

It is an easy way to connect devices like wireless cards or soundcards! All of this is done by plugging the adapter into any available PCIe X1 slot of your motherboard and then installing the driver for it. After that, you’re ready to go!

You can use the Onvian PCI-E Riser Adapter Card for other devices such as wireless cards or sound cards too! It’s made with high-quality materials which protect your GPUs from damage due to EMI and power surges. And, if there are any mining issues, you will find it easy to diagnose them because there are LEDs on both ends of the cable.

Final Thoughts

Overall, You can use the Onvian Upgraded Mining Dedicated 4 PIN Graphics Card PCI-E, Riser Adapter Card to connect your USB device to your motherboard. It is an easy way of connecting devices like wireless cards or soundcards! All of this is done by plugging the adapter into any available PCIe X1 slot of your motherboard and then installing the driver for it. After that, you’re ready to go!

The Onvian GPU mining riser cable and card is a good investment since it’s composed of high-quality materials and features LED lights on each port, which aid in troubleshooting. This PCI Express x16 riser card also protects your GPU from EMI and power surges and provides extra power to your GPUs at the same time.

  • Pros
  • Upgraded riser built into the cable
  • 2 PCI express power cable
  • Heat sink and small size
  • Lightweight and compact in design
  • Easy to carry around and install
  • Cons
  • LED lights may not be visible in some motherboards

Ubit PCI-E Riser for Bitcoin Litecoin ETH Coin Mining Dual-6PIN Riser Card

Ubit 6-PCS PCI-E R

Specifications

  • Accessory Type: PCI-E Riser
  • Ports: 2 x 6 pin power ports (PCI-E).
  • Integrated: 1 x 4pin 12V port and 1 x SATA 15pin Power Port.
  • Interface type: PCI-E X1 to X16
  • Length of cable : 40cm, 50cm or 60cm
  • Compatibility: single slot PCI-E I/O motherboard
  • Interface: Two 6PIN power supply interface
  • Heat sink: Heat sink included to avoid overheating.

About

The Ubit USB 3.0 PCI-E Riser for Bitcoin Litecoin ETH Coin Mining Card comes with two 6pin riser cards that you can use to power up GPUs for mining! One of the main advantages of this riser is that it has an aluminum casing that reduces heat generation and protects your GPUs from damage due to EMI and power surges.

The Ubit PCI-E Riser for Bitcoin Litecoin ETH Coin Mining Card has two 6pin riser cards that you can use to power up GPUs for mining! Also, it is made with high-quality materials that reduce heat generation and protect your GPUs from damage due to EMI and power surges.

Features

This dual PCI Express 1x riser card features 2 x 6 pin ports so you can easily connect your GPUs to your motherboard. It also comes with a passive cooling heatsink designed to help keep the riser card cool during long hours of mining. The aluminum casing further absorbs heat and conducts it away from critical components such as the GPU!

The Ubit USB 3.0 PCI-E Riser for Bitcoin Litecoin ETH Coin Mining Card is compatible with most motherboards like ASUS, Gigabyte, MSI, etc. In addition, you can use this riser card with GPUs such as GTX 1060, 1070, and 1080 video cards. It has an easy installation process and doesn’t require any drivers or extra software to get started!

The Ubit USB 3.0 PCI-E Riser for Bitcoin Litecoin Ethereum Mining Card comes with a 12-month warranty and lifetime tech support! In addition, the riser card is made with high-quality materials that reduce heat generation for efficient cooling of your cards and protect them from EMI and power surges.

You can use the Ubit riser card for other devices such as wireless cards or soundcards! It’s made with high-quality materials which protect your GPUs from damage due to EMI and power surges. And, if there are any mining issues, you will find it easy to diagnose them because there are LEDs on both ends of the cable.

Final Thoughts

The Ubit USB 3.0 You can use a PCI Express riser card to connect your GPUs to your motherboard for mining purposes. It comes with two 6pin ports and a passive cooling heatsink designed to reduce heat generation and protect the GPU from damages due to EMI and power surges.

  • Pros
  • Replacement of the original BIOS connector
  • Simple installation process
  • No extra software or drivers needed
  • Enables fast GPU mining
  • Reasonably priced compared to other brands with similar specs
  • Lightweight yet durable in design
  • Cons
  • A riser is only accommodated two video cards at one time

VOLADOR PCIE Riser 1x to 16x Powered Riser Ethereum Mining Card

VOLADOR PCIE Riser 1x to 16x Powered Riser Ad

Specifications:

  • Ports: 1 x PCI-E 16x and 1 x PCI-E 1x.
  • Interface type: PCI-E x1 to x16.
  • Compatibility: Motherboard with at least the X16 slot open.
  • Package includes 1x VOLADOR PCIE Riser.
  • Interface type: PCI-E 8pin to 16pin.
  • Length of cable: 50cm
  • Compatibility: single slot PCI-E I/O motherboard
  • Interface: Two 8pin power supply interface
  • Feature: Powered by SATA 15pin Power Cable

About

VOLADOR PCIE Riser 1x to 16x Powered Riser Ethereum Mining Card is specifically designed for crypto-currency mining, including Bitcoin, Litecoin, etc. It will increase your mining speed big time if you use it with the appropriate software. The VOLADOR riser card has a simple design that features one PCI-E 16x slot and one PCI-E 1x. Both of the connectors are powered with an 8 pin connector. This means they both need to be plugged in when you want to use them. In addition, this riser card is powered with a SATA 15pin power cable.

Features

The VOLADOR PCIE Riser 1x to 16x Powered Riser Ethereum Mining Card has a simple design that features one PCI-E 16x slot and one PCI-E 1x. Both of the connectors are powered with an 8-pin connector. This means they both need to be plugged in when you want to use them.

The VOLADOR riser card is powered with a SATA 15pin power cable which enables fast mining speeds that are 5x faster than traditional GPU mining. The cable length of the VOLADOR PCI-E Riser is 50cm long, so it can easily reach your motherboard. In addition, it has an ESD protection feature that prevents damage due to EMI and other related accidents.

The VOLADOR PCIE Riser is the best riser for mining with your GPU and CPU by major companies like ASUS, Gigabyte, MSI, etc. The Version 007 PCIe riser card has an elegant design that offers durability and the reliability you need for your mining rig. The riser even comes with a 12-month warranty, which shows how much VOLADOR cares about its risers.

Version 007 features ESD protection to protect against damage due to EMI or other related accidents. This riser is also made with high-quality materials. Thus, it protects the components inside the riser from heat damage due to EMI or power surges.

Final Thoughts

The VOLADOR PCIE Riser 1x to 16x Powered Riser Ethereum Mining Card is designed for cryptocurrency mining. If you use it with the correct software, it will significantly enhance your mining rate. The riser card has a basic style that includes one PCI-E 16x slot and one PCI-E 1x. Both the connectors are powered with an 8-pin connector.

This riser card is powered with a SATA 15pin power cable that enables fast mining speeds 5x faster. In addition, the cable length of this PCIe riser is 50cm long. So you can easily connect it to your motherboard.

  • Pros
  • Higher speed than traditional GPU mining
  • 8 pin connector
  • Adjustable design
  • In-built ESD protection
  • Compatible with many GPUs
  • Cons
  • Only 50 cm long

FebSmart PCI-E Riser VER006C GPU Riser ETH Coin Mining 6 PIN Riser Card

FebSmart PCI-E Riser for Bitcoin Litecoin ETH Coin Mining 6 PIN Powered

Specifications:

  • Length of cable: 50cm
  • Compatibility: single slot PCI-E I/O motherboard
  • Interface: Two 8pin power supply interface
  • Feature: Powered by SATA 15pin Power Cable
  • Contracts: Gold plate contracts
  • Shield: 23.6in/60cm fully shielded
  • Speed: 5Gbps data transfer speed.

About

FebSmart PCI-E Riser VER006C GPU Riser ETH Coin Mining 6 PIN Riser Card. So, it is ideal for all kinds of mining, including bitcoin, litecoin, Monerom XMR, Zcash, ETH, etc. It is specially designed for Zcash mining. The riser card has an adjustable design which you can use for different GPU brands and types. In addition, you can use it to connect a GPU with a PCI-e 1x slot for mining.

The FebSmart PCIe riser card has a simple style that includes two 8pin power supply interfaces. You can use it as the motherboard connector and the aux power connector. This riser is powered by a SATA 15pin power cable which allows you to connect it to your motherboard.

Features

The FebSmart PCI-E Riser is the best riser for mining your graphics cards and CPUs. This riser card provides a steady flow of power. So, it protects against fraying or damage due to EMI or power surges. It even comes with a 12-month warranty on all device parts – proof that they stand behind their products!

The FebSmart PCIe riser features ESD protection from static electricity to protect against damage due to EMI or power surges. With its high-quality components, this riser can also protect itself from overheating.

The 3X high-performance solid capacitors on the risers extend the product’s life and increase its stability. The PCIe riser is a versatile solution for various applications, including GPU mining, 3D modeling, CAD rendering, AI computing, etc. Besides, the voltage transformer is also well shielded to protect against noise. This riser card is fully compatible with Windows and all AMD/Nvidia GPU series, 500 & 400 family cards!

Final Thoughts

The FebSmart PCIe Riser is a versatile solution for many applications. You can use it with all brands and types of GPUs and CPUs. Also, it offers great protection against overheating and EMI damage. This riser works perfectly with Windows and ETH mining software like Ethminer and Claymore. Further, Its simple design is also easy to use. And Even it helps to protect your devices from damage due to EMI or power surges. In short, if you add more GPUs to your Motherboards For Mining, the FebSmart is for you!

  • Pros
  • Adjustable design
  • Long term stability
  • Short circuit/over current/over-voltage protection
  • High-quality Riser components
  • Cons
  • SATA 15 pin cable (can be flimsy)

Buyers Guide: How To Select the Best Risers for Mining with Your GPU?

Before you go out and buy riser cards for your mining rigs, it is crucial to see what factors are to be considered. These factors will ensure that the risers you are buying offers high reliability and determine how efficient they are.

List of Factors To Look Out For When Purchasing the Best Risers for Mining with Your GPU

Length of Cable

The length of cable required by your motherboard may vary due to the different number of PCI-e slots available. Therefore, you must consider this factor before you choose a riser card. In addition, longer cables tend to lose speed because their signals have to pass through more connectors and can cause compatibility issues with certain GPUs. Therefore, you should prefer shorter cables that provide better signal strength if possible.

Number of Risers Required

When building a mining rig, you need to determine how many GPUs will be required for mining. The number of risers required varies according to the model and GPU brand used in your rig. For example, if you wish to use four graphics cards, two 1x PCI-e slots may not be enough because they do not provide sufficient bandwidth for every card to function properly. Therefore, it is necessary to consider this factor while choosing the number of risers required along with their ports.

PCIe Slots on Motherboard

The PCIe slots available on your motherboard play an important role in determining how to use riser cards together. If the number of PCIe slots on your motherboard is less than the number of GPUs you wish to use, then go for riser cards that come with more PCIe ports. This will allow you to connect all the GPUs required by your rig without any trouble.

USB Extender Cable

Some risers come with a USB cable to connect to your motherboard to transfer data between your GPU and CPU. The length of this cable depends on its usage – if it is used for communicating data between two devices, then it should be shorter, while if it is used for powering up risers, then it should be longer.

Cable Connectors Used

Besides the length of these cables, another important thing to consider while buying riser cards is the different types of connectors used for their cables. The three types of connectors include Molex, SATA, and USB. While Molex is less common now, it is compatible with all types of risers. SATA is used mainly for 1x to 16x riser cards as they offer a wider bandwidth than the traditional 4-pin Molex connector provided by GPUs. It is also safe from EMI damage to your motherboard or GPU caused by overloading due to overclocking.

Frequently Asked Question:

What are the best risers for GPU mining?

You will want to use USB 3.0->->2.5mm (with 4 pin Molex power input) PCI-E 1X -> 16X Powered Riser Adapter Card.

The most commonly used risers in the market are dual mining with your GPUs (for example, using NiceHash and Ethash algorithm, e.g., Ethereum). Either AMD or Nvidia GPUs can use these types of risers. They are powered via PCI-E cable directly from the motherboard, which is why they require 2x 6pin connectors even when just drawing 50Watts max per card.

What’s the best way to use my GPU and not break the bank?

 It depends. Every coin is different, and every card will provide better or worse performance for each type of coin. Some coins run great on Nvidia. Others work better on AMD. Today, I will focus mainly on Ethereum as it’s currently rendering a mining-induced fever dream inside my skull as I try to balance real life with crypto-mining.

Ethereum uses Ethash, which is based on an algorithm called DaggerHashimoto (a modified version of DaggerCrypto ). You made the main change to move from using a memory-hard hashing algorithm (i.e., Scrypt and SHA256) and instead relying on having many compute units performing 32 hash operations (Ethash). This means that GPUs are great at this type of task when it comes to mining.

Is it safe to buy a cheap USB riser card, or should I invest in better quality?

The real danger is having your GPU drop because of the 1x riser card. A bad 1x riser can easily fry one or even two GPUs if it’s not built well. Of course, some risers are better than others, but they should always be treated as disposable no matter what.

What are GPU risers, and what benefits do they provide for people looking to mine with their GPUs?

GPU risers are simple but important PCI-E cards used to separate the GPUs from the motherboard. Risers are made short to reduce latency between GPU(s) and motherboard allowing better airflow and cooling. Many people say you need expensive risers if you’re going to be mining with your GPUs, but this is not true. Instead, you can use simple 1x to 16x risers, which will work just fine.

Can I use both Nvidia and AMD GPUs? Do they work together?

Yes, you can run both AMD and Nvidia GPUs simultaneously. All you need to do is make sure they are plugged into the PCI-E risers in the correct slots (1x – 16x). Then, you can mix and match any brand or model of the graphics card.

Are all risers created equal when it comes to mining?

They are not created equal, but you don’t need to spend a fortune on risers. There’s nothing wrong with using cheap risers. Just make sure they have the correct power connector for your GPU(s).

How can I tell if my risers are functional?

You should always check your riser cables before using them so as not to fry any of your components. I recommend using a multimeter to check for continuity between each pin and that none touch one another or the riser itself.

Conclusion:

The Best Risers for Mining with Your GPU will have a four-pin Molex-type power connector, and extended length to reduce the chance of frying one or two GPUs if it’s not built well. When using risers with USB 3.0, you should use dual mining so that your GPUs are always being utilized at their full potential without restarting your miners every time you change the along you are trying to mine. Always check your risers before using them to ensure none of the pins are touching each other or the riser itself. Risers will be an important part of mining for quite some time, so choose wisely when making that investment.

Leave a Comment